-
-
OTC 7932 Ford Vacuum Front Hub Release Set
OTC
OTC
Ford Vacuum Front Hub Release Tool SetFor CV joint, ball joint, and wheel bearing sensor service, the only way to remove Ford`s new vacuum hub without breaking it is with this tool set. Hubs are plastic, standard removal tools simply will not pull...
List Price: $164.98
Our Price:
$49.95
|
-
-
Astro Pneumatic 7874 Pulley Puller and Installer Kit
Astro Pneumatic
Astro Pneumatic
Removes pressed on alternator and power steering pulleys on late model GM, Ford and Chrysler engines. Installs late model GM alternator and power steering pulleys including Quad 4
List Price: $31.38
Our Price:
$19.93
|
-
-
OTC 4518 5 Ton Bar Style Puller Set
OTC
OTC
This combination set includes our two most popular bearing splitters (2" and 3"), four sets of hex push-puller legs and a bar-type puller head with a 9/16" forcing screw. Separator tools are used with bar puller and legs for a wide variety of...
List Price: $116.95
Our Price:
$72.51
|
|
-
-
OTC 1176 Reversible Jaw Slide Hammer Puller
OTC
OTC
Item #: OTC1176. Features & Benefits: The basic slide hammer unit can be removed and used independently This puller with a 2-1/2 lb. hammer, 2-way and 3-way head is 27" in length The inside 2-jaw spread minimum 1-1/4" to the maximum 3-1/2" and...
List Price: $134.95
Our Price:
$81.04
|
-
-
Battery Terminal & Wiper Arm Puller
Lisle Corp
Lisle Corp
Battery Terminal & Wiper Arm Puller Removes battery terminals and bolted on wiper arms. A dual-purpose puller. Easily removes stuck battery terminals. Tighten knurled cone to force jaws under the cable clamp. Turn center screw to lift clamp off...
List Price: $32.99
Our Price:
$19.25
|
-
-
OTC 4581 Stinger Blind Hole Bearing Puller Set
OTC
OTC
- For pulling jobs requiring an internal pull, such as pilot bearings. - Set includes four collets which fit a wide range of applications. Select the appropriate sized collet by comparing it with the application. Insert the collet, expand it to fit...
List Price: $169.94
Our Price:
$108.99
|
-
-
OTC 7911 GM Crankshaft Balancer Puller Adapter Set
OTC
OTC
This is everything you need to pull harmonic balancers with three tapped holes. The shoulder bolts are designed to prevent them from being installed too deeply, protecting the crank sensor and/or interrupter rings from damage. The spacer adapter...
List Price: $56.95
Our Price:
$34.56
|
-
-
Neiko 5 Ton Bearing Separator Puller Kit
NEIKO
NEIKO
Neiko 5 Ton Bearing Separator Puller Kit Bearing Separator & Bolt: 30 mm ~ 50 mm with Bolt: 3/8" x L 120 mm x 24 T & 50 mm ~ 75 mm with Bolt 1/2" x 135 mm x 20 T 4 pc Main Rod 1pc Beam, Center Bolt
List Price: $129.99
Our Price:
$59.50
| |