-
-
Neiko 5 Ton Bearing Separator Puller Kit
NEIKO
NEIKO
Neiko 5 Ton Bearing Separator Puller Kit Bearing Separator & Bolt: 30 mm ~ 50 mm with Bolt: 3/8" x L 120 mm x 24 T & 50 mm ~ 75 mm with Bolt 1/2" x 135 mm x 20 T 4 pc Main Rod 1pc Beam, Center Bolt
List Price: $129.99
Our Price:
$59.50
|
|
-
-
2 Ton Capacity 4 Way 2 Jaw Reversible Puller
Sunex
Sunex
Features and Benefits: Can be assembled with standard or long reach for maximum versatility Convenient for both internal or external pulling Maximum reach: 3.375" Maximum spread: 4" This is used for pulling small gears,...
List Price: $19.09
Our Price:
$16.49
|
-
-
Advanced Tool Design Model ATD-3060 11 Piece Locking Wheel Nut Remover
ATD
ATD
Includes: 2 PC. 13/16 & 1 deep internal reverse threads sockets with 1/2 sq dr. Dual sided twist socket lugnut/lugbolt remover GM spline hubcap lock remover Extractor punch Small dual sided socket GM hubcap lock remover Socket installing...
List Price: $74.51
Our Price:
$41.00
|
-
-
OTC 1176 Reversible Jaw Slide Hammer Puller
OTC
OTC
Features and Benefits: The basic slide hammer unit can be removed and used independently This puller with a 2-1/2 lb. hammer, 2-way and 3-way head is 27" in length The inside 2-jaw spread mini
List Price: $134.95
Our Price:
$81.04
|
-
-
OTC 525 Steering Wheel/Flange Type Puller Set
OTC
OTC
Flange-Type Puller Combination Two specialty pullers in one box. You get a flange-type puller for removal of harmonic balancers, timing gears, and other parts with two or three tapped holes. You also get a steering wheel, pulley, and fly-wheel...
List Price: $103.90
Our Price:
$55.65
|
-
-
OTC 1121 1/4" to 15/16" Bearing Splitter
OTC
OTC
OTC 1121Bearing Splitter for use w/ OTC Puller Nos. 1020, 1022, and 1023. Features knife-like edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used w/ an OTC Grip-o-Matic...
List Price: $36.95
Our Price:
$21.13
|
-
-
OTC 7792 Slide Hammer Rear Axle Service Puller Set
OTC
OTC
Features and Benefits: The tools you need for flange- type rear axle and bearing removal on most late model passenger cars and light trucks. Set includes the No. 7374 rear axle pulling plate and 5 lb. slide hammer. The axle bearing...
List Price: $295.95
Our Price:
$170.32
|
-
-
OTC 7911 GM Crankshaft Balancer Puller Adapter Set
OTC
OTC
Features and Benefits: Everything you need to pull harmonic balancers with three tapped holes. The shoulder bolts are designed to prevent them from being installed too deeply, protecting the crank sensor and/or interrupter rings from...
List Price: $62.95
Our Price:
$34.56
| |